7mbr25sc120 igbt modules pim/built-in converter with thyristor and brake (s series) 1200v / 25a / pim features low v ce (sat) compact package p.c. board mount module converter diode bridge dynamic brake circuit applications inverter for motor drive ac and dc servo drive amplifier uninterruptible power supply maximum ratings and characteristics absolute maximum ratings (tc=25c unless without specified) item symbol condition rating unit collector-emitter voltage gate-emitter voltage collector current collector power disspation collector-emitter voltage gate-emitter voltage collector current collector power disspation repetitive peak reverse voltage(diode) repetitive peak off-state voltage repetitive peak reverse voltage average on-state current surge 0n-state current (non-repetitive) junction temperature repetitive peak reverse voltage average output current surge current (non-repetitive) i 2 t (non-repetitive) converter thyristor brake inverter junction temperature (except thyristor) storage temperature isolation between terminal and copper base *2 voltage between thermistor and others *3 mounting screw torque v ces v ges i c i cp -i c p c v ces v ges i c i cp p c v rrm v drm v rrm i t(av) i tsm t jw v rrm i o i fsm i 2 t t j t stg v iso continuous tc=25c tc=80c 1ms tc=25c tc=80c 1 device continuous tc=25c tc=80c 1ms tc=25c tc=80c 1 device 50hz/60hz sine wave tj=125c, 10ms half sine wave 50hz/60hz sine wave tj=150c, 10ms half sine wave ac : 1 minute 1200 20 35 25 70 50 25 180 1200 20 25 15 50 30 110 1200 1600 1600 25 290 125 1600 25 260 338 +150 -40 to +125 ac 2500 ac 2500 1.7 * 1 v v a a a w v v a a w v v v a a c v a a a 2 s c c v v nm *1 recommendable value : 1.3 to 1.7 nm (m4) *2 all terminals should be connected together when isolation test will be done. *3 terminal 8 and 9 should be connected together. terminal 1 to 7 and 10 to 26 should be connected together and shorted to copper base.
electrical characteristics (tj=25c unless otherwise specified) item symbol condition characteristics unit min. typ. max. zero gate voltage collector current gate-emitter leakage current gate-emitter threshold voltage collector-emitter saturation voltage input capacitance turn-on time turn-off forward on voltage reverse recovery time of frd zero gate voltage collector current gate-emitter leakage current collector-emitter saturation voltage turn-on time turn-off time reverse current off-state current reverse current gate trigger current gate trigger voltage on-state voltage forward on voltage reverse current resistance b value thermistor converter thyristor brake inverter i ces i ges v ge(th) v ce(sat) c ies t on t r t off t f v f t rr i ces i ges v ce(sat) t on t r t off t f i rrm i dm i rrm i gt v gt v tm v fm i rrm r b v ce =1200v, v ge =0v v ce =0v, v ge =20v v ce =20v, i c =25ma v ge =15v, ic=25a chip terminal v ge =0v, v ce =10v, f=1mhz v cc =600v i c =25a v ge =15v r g =51 ? i f =25a chip terminal i f =25a v ces =1200v, v ge =0v v ce =0v, v ge =20v i c =15a, v ge =15v chip terminal v cc =600v i c =15a v ge =15v r g =82 ? v r =1200v v dm =1600v v rm =1600v v d =6v, i t =1a v d =6v, i t =1a i tm =25a chip terminal i f =25a chip terminal v r =1600v t=25c t=100c t=25/50c 100 200 8.5 2.6 1.2 0.6 1.0 0.3 3.2 350 100 200 2.6 1.2 0.6 1.0 0.3 100 1.0 1.0 100 2.5 1.15 1.5 100 3000 5.5 7.2 a na v v pf s v ns a na v s a ma ma ma v v v a ? k item symbol condition characteristics unit min. typ. max. inverter igbt inverter fwd brake igbt thyristor converter diode with thermal compound 0.69 1.30 1.14 1.00 c/w 0.90 0.05 thermal resistance ( 1 device ) rth(j-c) contact thermal resistance * rth(c-f) thermal resistance characteristics igbt module 7mbr25sc120 * this is the value which is defined mounting on the additional cooling fin with thermal compound 2.1 2.2 0.35 0.25 0.45 0.08 2.3 2.4 2.1 2.2 0.35 0.25 0.45 0.08 1.05 1.1 1.1 1.2 5000 465 495 520 3305 3375 3450
igbt module 7mbr25sc120 characteristics (representative) 012345 0 10 20 30 40 50 60 8v 10v 12v 15v vge= 20v [ inverter ] collector current vs. collector-emitter voltage tj= 25c (typ.) collector current : ic [ a ] collector - emitter voltage : vce [ v ] 012345 0 10 20 30 40 50 60 8v 10v 12v 15v vge= 20v [ inverter ] collector current vs. collector-emitter voltage tj= 125c (typ.) collector - emitter voltage : vce [ v ] collector current : ic [ a ] 012345 0 10 20 30 40 50 60 tj= 25c tj= 125c [ inverter ] collector current vs. collector-emitter voltage vge=15v (typ.) collector - emitter voltage : vce [ v ] collector current : ic [ a ] 5 1 01 52 02 5 0 2 4 6 8 10 ic= 12.5a ic= 25a ic= 50a [ inverter ] collector-emitter voltage vs. gate-emitter voltage tj= 25c (typ.) collector - emitter voltage : vce [ v ] gate - emitter voltage : vge [ v ] 0 5 10 15 20 25 30 35 100 1000 10000 [ inverter ] capacitance vs. collector-emitter voltage (typ.) vge=0v, f= 1mhz, tj= 25c capacitance : cies, coes, cres [ pf ] collector - emitter voltage : vce [ v ] coes cres cies 0 50 100 150 200 250 0 200 400 600 800 1000 [ inverter ] dynamic gate charge (typ.) vcc=600v, ic=25a, tj= 25c gate charge : qg [ nc ] collector - emitter voltage : vce [ v ] 0 5 10 15 20 25
igbt module 7mbr25sc120 0 1 02 03 04 0 50 100 500 1000 ton tr toff tf [ inverter ] switching time vs. collector current (typ.) vcc=600v, vge=15v, rg=51 ? , tj= 25c switching time : ton, tr, toff, tf [ nsec ] collector current : ic [ a ] 0 1 02 03 04 0 50 100 500 1000 tf tr ton toff [ inverter ] switching time vs. collector current (typ.) vcc=600v, vge=15v, rg= 51 ? , tj= 125c collector current : ic [ a ] switching time : ton, tr, toff, tf [ nsec ] 10 50 100 500 50 100 500 1000 5000 toff ton tr tf [ inverter ] switching time vs. gate resistance (typ.) vcc=600v, ic=25a, vge=15v, tj= 25c gate resistance : rg [ ? ] switching time : ton, tr, toff, tf [ nsec ] 0 1 02 03 04 05 0 0 1 2 3 4 5 6 7 err(25c) eoff(25c) eon(25c) err(125c) eoff(125c) eon(125c) [ inverter ] switching loss vs. collector current (typ.) vcc=600v, vge=15v, rg=51 ? switching loss : eon, eoff, err [ mj/pulse ] collector current : ic [ a ] 10 50 100 500 0 5 10 15 20 [ inverter ] switching loss vs. gate resistance (typ.) vcc=600v, ic=25a, vge=15v, tj= 125c switching loss : eon, eoff, err [ mj/pulse ] gate resistance : rg [ ? ] eon err eoff 0 200 400 600 800 1000 1200 1400 0 50 100 150 200 250 300 scsoa (non-repetitive pulse) rbsoa
igbt module 7mbr25sc120 01234 0 10 20 30 40 50 60 0.0 0.4 0.8 1.2 1.6 2.0 2 10 100 tj=25c tj=125c [ inverter ] forward current vs. forward on voltage (typ.) forward current : if [ a ] forward on voltage : vf [ v ] 01 02 03 04 0 10 100 300 irr(125c) irr(25c) trr(25c) trr(125c) [ inverter ] reverse recovery characteristics (typ.) vcc=600v, vge=15v, rg=51 ? forward current : if [ a ] reverse recovery current : irr [ a ] reverse recovery time : trr [ nsec ] 0.0 0.4 0.8 1.2 1.6 2.0 0 10 20 30 40 50 60 tj= 25c tj= 125c [ converter ] forward current vs. forward on voltage (typ.) forward on voltage : vfm [ v ] forward current : if [ a ] 0.001 0.01 0.1 1 0.01 0.1 1 5 thyristor conv. diode transient thermal resistance thermal resistanse : rth(j-c) [ c/w ] pulse width : pw [ sec ] fwd[inverter] igbt[brake] igbt[inverter] -60 -40 -20 0 20 40 60 80 100 120 140 160 180 0.1 1 10 100 200 [ thermistor ] temperature characteristic (typ.) temperature [ c ] resistance : r [ k ? ] [ thyristor ] on-state current vs. on-state voltage (typ.) tjw= 125c
igbt module 7mbr25sc120 012345 0 5 10 15 20 25 30 35 8v 10v 12v 15v vge= 20v [ brake ] collector current vs. collector-emitter voltage tj= 25c (typ.) collector current : ic [ a ] collector - emitter voltage : vce [ v ] 012345 0 5 10 15 20 25 30 35 8v 10v 12v 15v vge= 20v [ brake ] collector current vs. collector-emitter voltage tj= 125c (typ.) collector - emitter voltage : vce [ v ] collector current : ic [ a ] 012345 0 5 10 15 20 25 30 35 tj= 25c tj= 125c [ brake ] collector current vs. collector-emitter voltage vge=15v (typ.) collector - emitter voltage : vce [ v ] collector current : ic [ a ] 5 1 01 52 02 5 0 2 4 6 8 10 ic= 7.5a ic= 15a ic= 30a [ brake ] collector-emitter voltage vs. gate-emitter voltage tj= 25c (typ.) collector - emitter voltage : vce [ v ] gate - emitter voltage : vge [ v ] 0 5 10 15 20 25 30 35 50 100 1000 5000 [ brake ] capacitance vs. collector-emitter voltage (typ.) vge=0v, f= 1mhz, tj= 25c capacitance : cies, coes, cres [ pf ] collector - emitter voltage : vce [ v ] coes cres cies 050100150 0 200 400 600 800 1000 [ brake ] dynamic gate charge (typ.) vcc=600v, ic=15a, tj= 25c gate charge : qg [ nc ] collector - emitter voltage : vce [ v ] 0 5 10 15 20 25
igbt module 7mbr25sc120 outline drawings, mm equivalent circuit schematic marking : white marking : white 23(n) 2(s) 3(t) 1(r) 21 (p) 26 25 22(p1) 7(b) 24(n1) 13(gx) 19(eu) 20 (gu) 18 (gv ) 17(ev ) 4(u) 12(gy ) 11(gz) 5(v) 15(ew) 16 (gw) 6(w) 10(en) 9 8 [ converter ] [ thyristor ] [ brake ] [ inverter ] [ thermistor ] 14(gb) 23(n)
|
